Product overview
Ironmaster Super Bench Pro V2: What to Know
Ironmaster's own product page lists an 11-position lock-out system at 0, 5, 10, 20, 30, 40, 50, 60, 70, 80, and 85 degrees, which is a finer-grained angle count than any other bench in this guide, and a weight capacity of 1,000 lb in the flat position, dropping to 600 lb in incline and upright positions. That flat-versus-inclined capacity split follows the same pattern as the Titan Fitness bench above: don't assume the higher number applies at every angle.
The seat mechanism is genuinely different from the other four benches here. Rather than an angle-based seat pad, the Super Bench Pro V2 uses a removable seat with three fixed height positions from the floor: 12.5 inches, 14.5 inches, and 23.5 inches. That's a real design difference worth understanding before comparing it feature-for-feature against the angle-based seats on the REP Nighthawk or Titan Elite Series; it's not a worse or better system on its own, just a different mechanism aimed at Ironmaster's attachment ecosystem.
That attachment ecosystem is the bench's real differentiator. Ironmaster's own spec page lists compatibility with a Crunch Sit-up attachment, Dip Bar Handles, a Chin-Up Bar, a Preacher Curl attachment, a Leg Attachment PRO, a Cable Tower Attachment (V2/PRO), a Seated Press Pad, a Head Extension Pad, a Nordic Curl/Leg Hold Down attachment, and a Hypercore attachment, with the caveat that accessories carrying a "/PRO" designation are the ones confirmed compatible with this specific model. None of the other four benches in this guide list a comparably documented attachment lineup as of this research.
At 69 lb, it's also the lightest bench in this guide, which matters for anyone moving it around a small space regularly, though a lighter bench under heavy incline load is also part of why Ironmaster rates it lower (600 lb) in non-flat positions. It carries a 4.8-out-of-5 average rating on its Amazon listing at the time of this research, for context, though star ratings can shift over time and shouldn't be read as a permanent figure.
Key Listed Features
11 lock-out angle positions (0° to 85°), the most granular in this guide
1,000-lb flat capacity / 600-lb incline & upright capacity
3-position height-based seat system (12.5", 14.5", 23.5" from floor)
Compatible with 10 documented Ironmaster PRO attachments, sold separately
Product image from current catalog data

![Flat Incline Decline Bench [Bells of Steel] FID Bench Press, Adjustable Weight Bench Foldable, Incline up to 7 Angles, 12 Gauge Steel, 1000 lb Capacity](https://bellsofsteel.com/cdn/shop/files/FID2-BEN-carousel-primary.jpg?v=1764590545)
